Maintenance Tips: What Makes a Car Overheat and How to Avoid It

The car is a machine that can run for hours without packing up. Sometimes, the car will overheat because of a number of problems and faults. Here is what makes a car overheat and how to avoid it in the future to give you a flawless road trip.

The most common reason why the car overheats is due to extreme heat conditions. Although, this is the most common factor to overheating, it isn’t the only one.

Cooling System Leaks – every engine must have a cooling system. It either has to be air-cooled or it has to use liquids in the cooling system. There may be a time where a leak might be present if a seal hasn’t been installed properly. The leak drops the pressure in the car making less liquid travel throughout the engine.

Block – a collection of debris in the engine is not uncommon but it isn’t normal. Debris could be made up of dust particles that have been collected. There could also be a thermostat that has not opened properly.

Failed Water Pump – this cause of overheating is one of the more common reasons. This car part assists the circulation of the coolant and maintains it. There could be an instance where the bearing could wear down and ultimately fail, stopping the coolant from circulating around the engine.

Coolant Problems – sometimes the coolant hasn’t been concentrated enough. This is usually a problem in the colder climates and cooler weather conditions. If the coolant gets too cold it will become thicker and more gel-like and block the pipes of the cooling system.

To avoid your car from packing up when it’s hot you need to switch the air conditioner off and open your windows at the first sign of overheating. You can turn the heater or blower on to transfer the heat into the car. It might be uncomfortable for you or any passengers you have in the car but your engine won’t give up when doing this.

You can let the car idle and rev it so that the water pump and fans can work faster to cool the engine down.

Don’t use the brakes too much when you are in heavy traffic. The more you stop the harder the engine has to work to move forward again. If you’re not careful you will need brake repairs sooner than necessary. Rather crawl slowly along the road if you can see the traffic flowing slightly.

Helpful Tips for DIY Car Radiator Flushing

Once you turn the key, start your vehicle’s ignition and begin to drive, your internal combustion engine starts producing a substantial amount of heat. In order to remove this heat and prevent your engine from overheating, a functional radiator is needed. A car radiator uses thermal heat exchange to eliminate high temperatures and heat to keep a vehicle’s engine in working condition. This means that larger vehicles require larger radiators to facilitate the same effect.

For radiators to be effective and stay cool, they must be cleaned regularly by means of flushing. Solid deposits, residues, and other sediment buildup can cause a cooling system to clog or fail entirely. Flushing a car radiator is one of the most important routine maintenance jobs and must be done to keep vehicles operational over time. Fortunately, it can be done on your own. It’s also quick and inexpensive to do. Continue reading to learn some tips that can help you when it comes time to flush your car radiator.

Get Started With the Right Supplies

The first thing to do when it comes to flushing a car radiator is gather up all the necessary supplies and materials. It is never a fun situation to get halfway through your project, only to discover you are missing a key element. Going back to the store could pose a problem; especially if the radiator has already been drained. Ideal provisions for radiator flushing includes a funnel, cloth rag, coolant, radiator flush solution, Phillips screwdriver or wrench, separate container for old coolant, and extra rags for accidents and spills. When you have determined that all your supplies are in place, you can begin the process of flushing the radiator.

Here’s What To Do:

Before you remove the radiator cap, be sure the car engine is COMPLETELY cool; otherwise you run the risk of spilling hot coolant on yourself. And this really burns!

Next, flush the used coolant out of the radiator. Do this by locating the radiator drain plug. It is typically located at the bottom of the radiator. If you have trouble finding it, refer to your owners’ manual or look online for pictures and instructional videos. You can also contact a professional mechanic for over-the-phone assistance.

Once you find the drain plug, place the container for old coolant under the drain and open it up. Let the old coolant flow out for a few minutes; if it seems to be moving slow, check to see if the plug is all the way open.

When the radiator is empty, replace the drain plug and open the radiator cap.

Next, pour the flush cleaning solution inside. Fill the remaining space inside the radiator with room temperature water.

Now you are ready to replace the radiator cap; just be sure it is screwed on tight. It is possible for caps to fall off, which allows coolant to escape from the radiator.

Let the car engine run until it reaches its normal driving temperature. Then turn it off and let it cool completely.

Once the car engine is cool again, you are ready to flush the solution from the radiator and add fresh clean coolant. Use the same emptying process as before.

Use a 50/50 solution of coolant and water to get optimal and safe results. You can find pre-mixed coolants at your local auto store. This is sometimes more convenient.

How to Improve the Quality of a Mobile Car Washing Service?

Mobile car wash machines are high utility equipment in the cleaning industry. These machines provide great value to both customers and owners of car detailing businesses. For customers, it saves them the trouble of taking the vehicle to the service station of a car detailing business. For businesses, these mobile car detailing machines allow them to offer a more convenient service to the customers and get more financial benefit from the service.

Need for a good quality machine

The first thing a customer thinks about a mobile car cleaner is perhaps the quality of the service. Do people get the same quality of cleaning at their door front that they get at a service station? The answer is yes, provided two conditions are satisfied.

The first is the dedication and integrity of the cleaning professionals involved. The cleaning process, performed at a service station, usually involves strict supervision of experienced cleaning workers or owners of the business. This is not always the case with a mobile car wash service. If the cleaning workers are dedicated, there will be no problems.You cannot control the level of professionalism beyond a certain point. However, you can certainly control the second aspect that affects the quality of a mobile car cleaning service that is quality of the machine used for cleaning. Here are a few tips to get high quality machines.

Type of machines all kinds of cleaning machines, nowadays, are projected on the Internet as mobile car washing machines. To an extent, it is true that different kinds of machines are suitable for car detailing. However, for cleaning the hard parts of a vehicle, such as engine components and body, you need a machine that can provide a reasonably high output power. Car pressure washers fit the bill perfectly. For interior cleaning, a portable carpet cleaner is the best machine.

Not all types of mobile car washing equipment are suitable for portable car wash. A high quality pressure washing machine can provide an output pressure as high as 8000 psi. However, such pressure cleaners are unsuitable for auto detailing. Here are a few tips to choose pressure cleaners for portable car wash.

Output pressure

The output pressure of these machines should not exceed 1500 psi. Machines with higher pressure levels might cause paint damage on the vehicle body.

Low flow rate

There is another reason for choosing pressure washers with low low output pressure for auto detailing. If the pressure is low, the flow rate should also be low. The ideal machine should be the one with the pressure level of less than 1500 psi and a low flow rate, which means less quantity of water, is transferred to the surface. That in turn means the vehicle surfaces dry up quickly after cleaning. This will certainly make the vehicle owners happy, as they can use the machine without much delay after cleaning.

Machines for interior cleaning

It must be noted that steam car wash machines and pressure cleaning machines are not ideal for cleaning the interior surfaces of vehicles. A portable carpet cleaner is the ideal machine for the purpose.

The interior cleaning involves both carpet cleaning and upholstery cleaning. Ordinary carpet cleaners are not the best upholstery cleaners. A small 4 inch wide tool is used by the best upholstery cleaners for car fabric upholstery and carpeting.

Removing Tar, Sap and Bugs From Your Car’s Paint

Summer is tar, sap and bug season. During the warm months of summer, insects are at full population, trees and large bushes produce more sap, and the heat of the sun softens the asphalt, producing tar balls. Although sap and tar are a chore to remove, they do not present an immediate hazard to your automobile’s paint finish. However, insect remains are acidic and will quickly damage both paint and trim.

Cleaning Road Tar

While driving, your vehicle is constantly being speckled with small bits of asphalt, tire rubber, grease and oils that is being kicked up by the cars and trucks ahead of you. If allowed to remain on your automobile, these petroleum-based particles will become firmly attached and soap-and-water washing will do little to remove them. Over time the ugly black spots build up and ruin your vehicle’s appearance.

To remove road tar, you need a solvent. Most automotive tar removers contain kerosene, mineral spirits or another petroleum distillate. Don’t worry, though, as they are combined with lubricants to surround and buffer the road tar from your paint. They are quite safe to use.

Of the petroleum distillate products I’ve tried, I like Autoglym’s Intensive Tar Remover the best. A more modern solution for tar removal is the detailing clay bar. If the contamination extremely stubborn on your painted surfaces, use a paint cleaning polish. I recommend Klasse All-In-One. It’s a fine polish, paint cleaner and wax in a single-step process.

Cleaning Tree Sap

Cleaning tree sap off of your vehicle’s finish can be a little more difficult than removing tar or bird droppings. When removed in haste, hardened sap can scratch your paint. I discovered that if I hand rub the spots with a small amount of mineral spirits on a soft cloth, I can easily remove the sap without scratching. Mineral spirits acts as a solvent to break up and dissolve the sap.

If there is a large amount of sap on the car, or if the sap has been left on the finish for an extended period of time, it can be a lot of work to remove. In these extreme cases, I learned that polishing the affected areas with a fine paint rubbing compound removes the hard shell of the sap spots. Once the hard shell is gone the mineral spirits will clean away the remainder with ease. The light-duty rubbing compound softens the sap so the mineral spirits can do its job. The goal is to use the least pressure possible, to reduce the risk of scratching the paint. After removing heavy sap, I always buff the treated areas with a good polish to clean up any marks created during hand rubbing with solvent. The treated area must also be re-waxed.

Cleaning Insects

The head-on collision of between an insect your car’s paint and trim is a disaster for both the bug and your car. As the insect’s exoskeleton explodes, acidic fluids leak onto your car’s paint. This may seem like a small thing, but did you know that shellac is a byproduct of insects? The bug splats on your car are basically shellac mixed with a bunch of nasty stuff. When allow to stay for a few days in the baking sun, any attempt to remove the calcified remains without a proper cleaning solution results in scratched paint.

The secret is to loosen and dissolve insect remains with a solvent that will cut through the shellac. Autoglym Intensive Tar Remover does a great job. For those flying friends with a little extra grip, agitate with soapy water and a paint-safe bug sponge.

If you have a particularly large bug mess, I discovered a Paint Repair Clinic trick that seems to work pretty well. If you use a pre-wax cleaner, such as Klasse All-In-One, apply a small dab to the offending bug splat. Next, cover the spot with a wadded-up tissue and allow it to soak for a few minutes. Then pinch up the mess and give it a soft wipe with the back side of the tissue.

After Cleaning Tar, Sap & Bugs

All of the chemicals used to remove the aforementioned road stains also remove your car’s wax protection. After cleaning away tar, sap or bugs, spot wax the affected areas or re-wax your whole vehicle. If you don’t have time to wax right away, use a quick spray wax like Meguiar’s Ultimate Spray Wax. This product is great for touch-ups or a quick waxing after the weekly wash.

Tips For Buying Auto Parts Online

The Internet is a wonderful place for buying many things. You will often have access to options that you never knew existed. You will also have many more choices and can often find a better deal on items online than in a brick and mortar store. One area of items that are advantageous to buy online are auto parts. With the ability to search millions of websites and many different stores, you may be much more likely to find the right part for even the most obscure type of vehicle online than in the offline world. You may also find a better price at the same time.

Here are a few tips for buying auto parts online:

Major Stores

Pretty much every major auto parts store has an online version, where you can search their entire nationwide database for parts availability, order the part and have it sent to you wherever you are. It’s highly convenient and makes it easy to compare prices. Some major chains that have sites include, NAPA Online, Advance Auto Parts, Auto Parts Warehouse, AutoZone, CARQUEST, Pep Boys and many more. Nearly all of them offer online search and shopping options. Some of them even offer a low price guarantee on certain parts and provide you with news, information, rebate deals and special online only deals.

Manuals & Auto Repair Information

There are many resources online that may help you install your auto part. Check out 10w40 for manuals and information for many makes and models of vehicles.

Auto Forums

You can find information on your make or model of vehicle as well as ask questions and get answers about repairing and maintaining it. You will also be able to talk with other auto enthusiasts. Some popular auto forums are Automotive Forums, AutoForums, CarForums, Autoforum Universe and the forums at Automotive. You may be able to get advice on where the best place to get parts is for your specific make and model. There are also forums available for specific makers which should also have excellent information on where to get parts.

Books

You can easily order any of the auto repair manuals you need online at Amazon or Barnes & Noble. This may be more convenient for people who don’t have a bookstore or auto parts store near them. The most popular and reliable publishers of auto manuals are Chilton’s and Hayne’s. Buying the manual online, you may be able to save money by comparing prices at numerous book sellers, you can use AddAll to do this.

Auctions

Auction are a great place to search for your auto parts and eBay Motors is where you will want to begin your auction search. Currently there are a staggering 546190 listings on eBay Motors under Car & Truck Parts alone. You will want to drill down to the specific category for your desired part, then try to narrow the search under that category.

More Tips

Make use of the many price comparison search engines, coupon code sites and be sure to watch out for shipping costs. Some sites, such as Autopartswarehouse offer free shipping, so be sure to take advantage of those offers.

In summary, buying auto parts online has many advantages, from better availability, to the ability to compare prices much more easily to the wealth of auto repair and maintenance information at your fingertips.