Cleaning Oil, Grease, Butter, Vegetable Oil, Margarine, Cosmetic Creme Stains From Your Car

One of the worst problems in the cleaning of cars is the wide variety of stains that appear on the seats, carpet and interior. We will discuss the ways to clean such tough stains in car interiors as Oil, Grease, Butter, Vegetable Oil, Margarine, Cosmetic Crème Stains. First off the important thing is to use a Neutral soap or Neutral products with a ph of 7. (PH is measured on a scale of 0-14 for acidity or alkalinity) 7 are in the middle meaning neutral. This way none of the products used will form chemical reactions while using them.

Mobile Auto Detailing and Mobile Car Washes use a variety of trade secrets to clean such stains effortlessly and efficiently and charge quite a bit to do it. The average cost to detail the interior two front seats of a car is $25.00 plus carpet shampoo of $25.00.

Some companies recommend certain brands to their mobile car wash teams. The best types of cleaners for these stains are solvent based and should be used carefully. They can combine and make more of a mess if not used properly. Caution is important and a virtue and this is truer in this scenario than in any other part of auto detailing. First clean up the main mess by scraping excess and getting it down to as small an area as possible. Plastic razor blades work good for this. Then gently dab your solvent cleaner on the stain without ripping and it should start to come up. If you get no discoloration from this you can then wipe gently. When you are all completed try using some foam type upholstery cleaner and wipe. Then perhaps some warm water on a rag to finish the job.

The Science of Car Cleaning Products

In most cases you can clean and protect your vehicle with just a few basic car cleaning products. In this article you will learn some of the science behind auto detailing supplies so you can clean your car the right way.

Soil can be organic, non-organic or petroleum. That’s important to know. If you can identify the soil you’re dealing with you can use the right cleaner. When you use the correct cleaner most stains come out with ease.

Take organic soil as an example. Organic basically means that it contains carbon. Stains in this group include proteins, animal fat, body oil, mold, yeast, insects, bacteria and excrement. The classic example is the batch of hot French fries your three year old spilled on the back seat. That’s an organic soil stain.

Non-organic soil does not have carbon molecules. Most often we find these stains on the exterior the vehicle. A good example that frustrates most of us from time-to-time are water spots from minerals. Acid rain spots fall into this category, as well.

Finally we get to petroleum. These soils come from substances that do not contain or cannot be mixed with water. Motor oil, grease and road tar are the most common petroleum soils. Note that chewing gum is also a petroleum soil.

Now that you are aware of the three types of stains we can begin to discuss cleaners. Let me tell you, there are a lot of them. Unfortunately, no one has invented a true all-purpose automotive cleaner. Due to the many different surfaces and soils, automotive cleaners are complex mixtures of chemicals blended for a particular type of surface or soil. The most common chemicals used include surfactants, solvents, wetting agents, saponifiers and chelators.

Soaps and detergents are made using a surfactant. It’s an agent that has two compounds. One molecule is attracted to the soil itself, while the other loves water. The compound that’s attracted to water is a hydrophile. Its job is to surround the soil. The soil attracting agent is a hydrophobe. Its purpose is to break up the soil so the hydrophile can get to it and make it float away.

All cleaners needs a solvent of one sort or another to dissolve dirt and carry it away. Some solvents, including mineral spirits, work on petroleum soils and may be necessary on surfaces damaged by water. Did you know that the most common solvent used in cleaners is water?

Speaking of water, any solution that has a water base or mixes with water has a pH level. The term pH is merely a measurement of the relationship between hydrogen ions and hydroxyl ions. When you have more hydrogen ions than hydroxyl ions, that’s an acid. Likewise, if you have more hydroxyl ions than hydrogen ions it’s an alkali. Knowing this is important because any cleaner that falls at either end of the pH scale can cause serious damage.

The pH scale runs from 0 to 14. The lower half of the scale represents acids and the upper half represents alkalis. As you might have guessed, water is neutral and has a pH of 7.0.

If you know the pH of a cleaner you will know where you can use it. A carpet shampoo should have a pH around 8 or 9, whereas an all-purpose wheel cleaner should be between 12 and 14. Try using a cleaner made for wheels on your car’s fabric and carpet will make a pretty big mess.

Now that you know the basics you can better understand why there are so many car cleaning products and auto detailing supplies. Your vehicle has many different surfaces and they have different cleaning requirements. You can avoid using harsh cleaners by using basic protection. Wax the exterior several times each year and protect the interior with appropriate products. For the ultimate in protection, use an outdoor car cover or a waterproof car cover when you park outside.

Ten Pre Sale Car Cleaning Tips

If you are selling your car there are a number of things you can do that will vastly increase the chances of it selling for a good price. Most people will give their car a quick clean before selling but if you spend a little extra time paying attention to areas that are usually left neglected, then potential buyers are more likely to see your car as the more desirable purchase.

1. Ensure your wheel arches are thoroughly cleaned using a degreaser or an all purpose cleaner, suitable brushes and an old wash mitt. They can then be dressed to help rejuvenate the plastic liners. Clean arches really help to give the impression of a well looked after car.

2. Clean the rears of your wheels as well as the faces & spokes. Most people will only clean the front of their wheels and so if you make the effort to also clean your wheel rears with a long reach wheel brush you will help to give your vehicle the upper hand and can even make it look like it is not heavily used, even if it is.

3. Dressing your tyres really finishes off the look of a freshly cleaned car. If arches and wheels have been properly cleaned, dressing the tyres will help to compliment these parts. Faded, tired, brown looking tyres are guaranteed to bring down the look of an otherwise clean car.

4. Rusty lug nuts look tatty and leave your car looking neglected and old. They should be removed and painted to give them a fresh new look. You do not have to spend allot of time doing this, a few light coats of satin silver or black spray paint before refitting will greatly help to improve the look of the exterior.

5. License plates should be replaced if they are cracked, oxidized or faded. You may think that prospective buyers will not care about license plates and will overlook them but a new set will help to give your car a fresher more youthful appearance.

6. Your engine bay should be thoroughly cleaned & dressed. Most people neglect the engine so if a prospective buyer views your car after viewing one with a dirty oily engine bay then it will help to leave a good impression and show that you care about the car.

7. Door shuts should be cleaned to remove any loose debris or build up of grease and dirt from around the hinges. The door shuts are one of the most common areas for rust to form so if they are clean and contaminant free it lets potential buyers know that rust is not likely to be a problem in the near future.

8. Your upholstery and headlining should be thoroughly cleaned to rejuvenate, freshen and brighten up the interior. Most people will only vacuum off the interior and will probably not touch the headlining so you will have the advantage of having a fully restored interior.

9. Leather should be deep cleaned using appropriate brushes and cleaning products to remove dirt from the grain. After cleaning, leather should be fed/conditioned to prevent it from drying out and keep it supple. This process will also help to bring back the original scent of the leather which is very desirable especially when trying to sell your car.

10. Plastics and trim should be cleaned and rejuvenated using appropriate products. Interior plastics & trim should be cleaned and dressed with a product that leaves a natural, non greasy finish while the exteriors should be treated with a durable product that will give a deep dark finish and protect them from rainwater & UV rays.